Scuba Forge is reader-supported: some links on this page are affiliate links, and as an Amazon Associate Scuba Forge earns from qualifying purchases at no extra cost to you. Learn more.
SEAC Driver Wrist-Mount Freediving Computer
The SEAC Driver stores 500 dive records, so it suits you if you need to track a high volume of dives.
$240 under the category median
- This Scuba Diving Computer
- $249.95
- Median of the 15 Scuba Diving Computers we screened
- $489.99
- Range
- $224 to $1549
- Cheaper than this one
- 1 of those 15
4 deciding specs not stated
- Maximum Operating Depth
- Not stated in the listing – confirm with the seller before ordering
- Battery Life
- Not stated in the listing – confirm with the seller before ordering
- Case Diameter
- Not stated in the listing – confirm with the seller before ordering
- Display Resolution
- Not stated in the listing – confirm with the seller before ordering
Suits recreational freedivers
- Recreational freedivers
- Budget-conscious scuba students
- Fitness swimmers
- Data-driven dive logs
3.3/5 from 186 buyers
- Average buyer rating
- 3.3 out of 5
- Ratings behind it
- 186
- What that supports
- A large enough sample to read as a real buyer signal
- Where it comes from
- The product listing, read 10 November 2026
The SEAC Driver in Short
SEAC Driver Freediving Computer tracks up to 328′ (100m) for freedivers who need a reliable subsurface computer for deep-water sessions.
Recording up to 21,000 logging items allows a diver to maintain a detailed history of every dive without worrying about the device running out of storage. This high capacity means the device can hold a large volume of data over many months of use.
The SEAC Driver manages this data volume while also offering 500 dive records and a user-replaceable CR2032 battery. It provides a consistent way to track progress over time without requiring a technician to replace the power source.
We evaluated 15 scuba diving computers and selected the SEAC Driver for a full review because it had 186 buyer ratings, the 8th most of the 15 screened. This review is for divers who prioritize data logging and long-term record keeping. Our full review is based on a data-driven spec breakdown of the products we compared.
How Scuba Forge picked: we started from the 200 most-reviewed scuba diving computer listings in our retail dataset, removed duplicates, accessories and off-category products, and 15 qualified. This product is one of 15 from that pool chosen for a full review. Our scores blend buyer satisfaction (60%), price position against comparable products (25%) and rating volume (15%). Specifications come from manufacturer listings and ratings from verified Amazon buyer reviews (data checked November 2026).
The Short Answer on the SEAC Driver
Best for: you need a wrist-mounted freediving computer that tracks up to 99 dive sessions and offers 328′ (100m) depth capability.
The SEAC Driver is a practical choice for these requirements at $249.95.
- Pro: The device stores 21,000 logging items for extensive data tracking.
- Pro: It features a backlit display for visibility in low-light conditions.
- Pro: The user-replaceable CR2032 battery allows for easy power maintenance.
- Con: The 3.3 rating from 186 buyers suggests a lower level of user satisfaction compared to higher-rated alternatives.
- Con: A 328′ (100m) depth display limits use for deep-sea commercial diving operations.
Don’t buy this if: you require a depth display that exceeds 328′ (100m).
Price assessment: The $249.95 price point is a fair market value for a dedicated freediving computer with these logging capacities.
Scuba Forge score: 7.3/10 (data-driven – see “How we picked” above)
If you need a high-end display, see our full Teric Color review.
Beginners should first find the best entry-level freediving computer for their needs.
Key Specifications
| Maximum Operating Depth | 328′ (100m) |
| Battery | User-replaceable CR2032 |
| Dive Sessions | Up to 99 |
| Dive Records | 500 |
| Logging Items | 21,000 |
| Display | Backlit |
| Alarms | Audible |
The Maximum Operating Depth of 328′ (100m) measures the deepest point the SEAC Driver can safely function.
Where this sits in the buyer data: Among the 15 products screened for this category, this one’s 3.3 rating places it #15, on 186 ratings – above the 186-rating median of that group, so the average rests on more feedback than most of its comparables. On price it undercuts 11 of them.
Before You Buy: Subsurface Computer Checklist
The first thing to check is the depth limit of 328 feet (100m) to ensure it meets your specific training requirements before you order.
- ✓ Confirm the 328-foot depth limit — if you require a deeper rating, the device will not function at those depths.
- ✓ Verify the CR2032 battery type — if you cannot source this specific battery, you will be unable to power the unit.
- ✓ Check the 500 dive record storage — if you exceed this limit, you will need to manually delete old data to save new dives.
- ✓ Budget for the $249.95 price point — if your budget is lower, you will need to consider different brands or models.
You should not buy this product if your training requires a depth rating exceeding 100 meters.
When you need to know if you can save enough dives before deleting old ones, the SEAC Driver stores 500 dive records and up to 99 dive sessions.
Switching between metric and imperial units is a standard feature that allows you to toggle between measurement systems while using the device.
What the Numbers Mean in Use
How 21,000 logging items provide extensive dive tracking history
The SEAC Driver stores up to 21,000 logging items and 500 dive records, allowing you to maintain a long-term history of your underwater activity. This high capacity means you can track progress over hundreds of sessions without needing to clear old data to make room for new entries.
With the ability to hold 99 specific dive sessions, the SEAC Driver provides enough space for a user to document every excursion for an entire season. This level of data retention functions like a digital logbook, ensuring that your historical data remains accessible for review as your experience grows.
Versatile Dual Mode Operation
The SEAC Driver supports both Free Dive mode and Watch mode, allowing you to transition the device between specialized underwater tasks and standard timekeeping. You can use the watch mode for surface-side requirements while keeping the freediving functionality ready for your next descent.
Switchable imperial and metric units ensure that the device displays measurements in the format you prefer, whether you use feet or meters. This flexibility allows you to maintain a consistent workflow regardless of the regional standards or personal preferences you use for your planning.
How audible alarms provide sound-based safety notifications during dives
Audible alarms provide a sound-based notification system that alerts you to specific depth or time parameters during your dive. Because these alerts use sound, they provide a layer of notification that does not rely solely on visual confirmation of the backlit display.
The depth display reaches up to 328′ (100m), which defines the maximum depth where the device functions. These alarms operate within that 100m limit, providing a consistent notification range for the maximum depth the SEAC Driver is rated to handle.
New divers can also view our comparison of the best scuba diving computer for beginners.
How the SEAC Driver Compares to Alternatives
The SEAC Driver provides a high logging capacity of 21,000 items, which allows for extensive historical data tracking over long periods of use.
- The SEAC Driver matches the Cressi Goa and SEAC Partner at the $249.95 price point.
- The SEAC Driver holds 500 dive records, while the Cressi Donatello Scuba Dive Computer offers air and nitrox flexibility.
- The Mares Puck Pro+ 414135-GRBK is $69.05 more expensive than this product.
- The Suunto Ocean Dive Computer SS050984000 costs $149.05 more than the SEAC Driver.
If you require a multi-mix dive capability or a specific Bühlmann Z16 GF algorithm, the Mares Puck Pro+ 414135-GRBK or the Suunto Ocean Dive Computer SS050984000 are the better picks for those specific requirements.
Getting the SEAC Driver Working, and What to Check After
Setting Up the SEAC Driver
You must have a CR2032 battery available before the SEAC Driver can be used for any dives.
- Open the back housing to access the battery compartment.
- Insert a fresh CR2032 battery into the slot.
- Power on the device to confirm the backlit display functions.
- Select either imperial or metric units to match your preferred measurement system.
Warranty and Support: What to Check
Warranty coverage varies by seller and country, so verify your specific terms upon purchase.
- Confirm the battery compartment seal remains intact to ensure the unit maintains its water resistance.
- Verify the 328′ (100m) depth rating is active in the software to prevent depth limit errors.
- Check that the replacement strap matches the mounting points on the SEAC Driver to ensure it stays secure.
- Test the audible alarms by triggering a simulated depth limit to confirm the hardware signals correctly.
Perform a power cycle and verify all 21,000 logging items are accessible the day the unit arrives while a return is still possible.
What Buyers Still Want to Know About This Scuba Diving Computer
What does the SEAC Driver cost to maintain?
The cost to keep the SEAC Driver running is low because it uses a user-replaceable CR2032 battery. These standard coin cells are widely available and inexpensive to replace compared to proprietary power cells.
How many dive sessions can the SEAC Driver store?
The SEAC Driver stores up to 99 dive sessions and holds 500 individual dive records. This capacity allows for extensive logging of underwater activities without the need to clear data frequently.
Does the SEAC Driver work for deep dives?
Yes, the SEAC Driver supports a depth display of up to 328′ (100m). This depth limit defines the maximum point the device can safely function during a dive.
What kind of logging can the SEAC Driver perform?
The SEAC Driver handles 21,000 logging items, which provides significant space for tracking various data points. This high count allows you to monitor multiple variables throughout your underwater sessions.
Is the SEAC Driver Right for You?
Who the SEAC Driver suits and the jobs it is the wrong choice for, listed below with the reason for each.
Who this subsurface computer is for, and what it does well
Who the SEAC Driver suits
- Recreational freedivers — the dedicated Free Dive mode and 100m depth display
- Budget-conscious scuba students — the $249.95 price point and large 500 dive record storage
- Fitness swimmers — the Watch mode for surface tracking and metric/imperial unit switching
- Data-driven dive logs — the ability to store 21,000 logging items for detailed session tracking
- Night divers — the backlit display for visibility in low-light conditions
What this scuba diving computer handles well
- Freediving — the specific Free Dive mode
- Deep water exploration — the depth display up to 328′ (100m)
- Night diving — the backlit display
- Long-term dive logging — the 500 dive records and 21,000 logging items
- Surface fitness tracking — the Watch mode
What this scuba diving computer is the wrong choice for
- Technical deep diving — the 328′ (100m) depth limit
- Professional expedition logging — the 99 dive session storage limit
- High-intensity surface training — the CR2032 battery which is typically lower capacity than primary cells
What to budget alongside this dive computer, and what to skip
Accessories worth buying with the SEAC Driver
- Wrist mount — the product is a wrist-mount computer that requires a secure strap
- CR2032 batteries — the user-replaceable battery type required for power
- Dive logbook — to manually cross-reference the 21,000 logging items
- Mask and fins — essential gear for the freediving and scuba activities supported
Accessories you can skip buying for this subsurface computer
- External data logger — the device already stores 500 dive records
- Extra batteries for the device — the CR2032 is user-replaceable and standard
- Metric conversion software — the device features switchable imperial and metric units
Where to Buy This Dive Computer
The SEAC Driver sat at $249.95 in the listing data from November 2026; the price you see at checkout can differ.
Scuba diving computers are sold by the retailers below – we do not track which of them has the SEAC Driver in stock, so check availability and the current price with the retailer before making a trip.
- REI (online and physical stores) — reliable inventory of major brands and in-store expert advice
- Amazon (online only) — massive selection and easy comparison of consumer models
- ScubaGear (online only) — specialist retailer with deep technical inventory
- Triton Sports (online and physical stores) — specialist retailer with expert staff and technical gear
- DiveInn (online only) — large online catalog for international and domestic brands
- Dick’s Sporting Goods (online and physical stores) — wide availability of mainstream brands and physical locations
Final Verdict on the SEAC Driver
If you require a device that handles both freediving and standard watch functions, the SEAC Driver provides a dual-mode interface. The watch mode allows for timekeeping, while the Free Dive mode provides specific data for subsurface activities.
The SEAC Driver stores up to 99 dive sessions and 500 dive records, which allows for long-term tracking of your underwater activity. It also holds 21,000 logging items for detailed data management. Because it features a backlit display, you can read your depth and session data in low-light environments.
You can choose between imperial and metric units to match your preferred measurement system. The device supports a depth display up to 328′ (100m), which defines the deepest point the unit can safely function. Audible alarms provide a secondary notification system for depth or time limits during your dives.
The SEAC Driver uses a user-replaceable CR2032 battery, which allows you to swap the power source without replacing the entire unit. This specific battery type is a standard coin cell that maintains the device’s compact form factor.
You should choose the SEAC Driver if you need a specialized freediving computer that offers extensive logging capabilities and dual-mode functionality for around $249.95. This model provides a high volume of storage for 21,000 logging items, making it a practical choice for those who track frequent dives.
The 3.3 rating from 186 buyer ratings provides a baseline of user feedback for this specific model. While the rating reflects buyer experiences, the 328′ (100m) depth limit and extensive 99-session storage capacity are the primary technical specifications for your underwater use.
Skip it if: You require a depth rating exceeding 328′ (100m) or if you need a device with a larger battery capacity than the CR2032 coin cell provides.
Where to go next in our scuba diving computer coverage
- Best Dive Computers for Nitrox
- Tracking Depth and Bottom Time While Snorkeling With a Scuba Diving Computer
- Which Scuba Diving Computer Keeps You Safe During Deep Technical Dives Under 260m?
- The Scuba Diving Computers That See My Dive Data on My Phone
- The Scuba Diving Computers That Work Best for Beginners
- Which Freediving Computer Is Best for Entry Level Use?